Posted on

Black Horse Armored Cavalry Troop Army Deal (VUSAB02) Spotlight

Black Horse Armored Cavalry Troop Army Deal (VUSAB02)Contains seven plastic M113 Armored Personnel Carriers, three M551 Sheridan Tanks, one M48 Patton Tank and two Decal Sheets.

The 11th Armored Cavalry, known as the ‘Blackhorse’ Regiment, developed radical new tactics to combat an elusive and determined enemy. Conventional wisdom asserted that armour had little to no role to play in the jungles, deltas, and rough terrain of Vietnam. The Blackhorse Regiment proved conventional wisdom wrong. The regiment’s unofficial motto, ‘Find the bastards, then pile on’, embodied their tactics for a highly mobile and heavily armed combined-arms force to seek out and destroy an unconventional enemy.

Check out the Black Horse Armored Cavalry Troop in the Online Store…

As American involvement in the Vietnam War increased, there was a need for additional combat formations. In March 1966 the 11th Armored Cavalry Regiment was ordered to Vietnam. In preparation, the regiment made a series of modifications to their equipment and organization to better fight a guerrilla war. Feedback from Vietnamese Armoured Cavalry Regiments suggested that neither the jeeps nor the M114 reconnaissance carriers that Blackhorse had were much use in Vietnam. Both were replaced with the larger, more mobile and better protected M113 armoured personnel carrier (APC).
Black Horse Armored Cavalry Troop Army Deal (VUSAB02)
M113 Armored Personnel Carriers (x7)
M551 Sheridan (x3)
M48 Patton (x1)

Black Horse Armored Cavalry Troop Box Contents
Contact the customer service team at [email protected] if you have issues with any components.
M113 Sprue (x7)
Black Horse Armored Cavalry Troop Army Deal (VUSAB02)
M551 Sheridan Tanks (x3)
Black Horse Armored Cavalry Troop Army Deal (VUSAB02)
M48 Patton Tank (x1)
Black Horse Armored Cavalry Troop Army Deal (VUSAB02)

Decal Sheets

The Black Horse Armored Cavalry Troop In ‘Nam

Assembling Black Horse Armored Cavalry Troop

Assembling the M113

Assembling the M48 Patton

Black Horse Armored Cavalry Troop Army Deal (VUSAB02)Black Horse Armored Cavalry Troop Army Deal (VUSAB02)

Assembling the M551 Sheridan

Black Horse Armored Cavalry Troop Army Deal (VUSAB02)

 

Posted on

M551 Sheridan (VUS002) Assembly Guide

Step 1. Begin assembly by attaching the tracks to the hull of the M551 Sheridan.

Note: Each track has been keyed to correspond with a particular side of the hull; this aids in ensuring the correct orientation of the tracks when assembling the miniature.

Below: The correct alignment for the left-hand side track.Below: The correct alignment for the right-hand side track.Below: The left-hand side track attached to the hull.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Tip: When referring to left or right-hand side in regards to a Flames Of War miniature, the orientation is determined as if looking at the vehicle from the rear.
Below: The right-hand side track attached to the hull.Step 2. Attach the driver’s vision hatch to the front of the M551 Sheridan.Below: The driver’s hatch vision correctly attached to the front of the M551 Sheridan.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 3. Next, attach the M81 152mm gun to the front of the turret.Below: The M81 152mm gun correctly attached to the front of the M551 Sheridan turret.Step 4. The smoke dischargers attached to the underside of the M551 Sheridan turret. Each side has been keyed to corresponding part. The right-hand side can be seen below.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Below: The left-hand side smoke discharger recess.Below: The corresponding left and right-hand side smoke dischargers keyed to match the turret.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Below: The smoke dischargers correctly attached to the M551 Sheridan turret.Step 5. Next, attach the loader’s hatch to the top of the turret.Below: The loader’s hatch attached to the top of the turret.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 6. Time to begin assemble of the commander’s hatch. Begin by attaching the .50 cal MG to the mount located at the front of the hatch. See the examples below.Step 7. Next, attach the gun shield to the front of the .50 cal MG.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Below: The gun shield attached to the .50 cal MG.Step 8. Finally, attach the bird-cage armour to the rear of the commander’s hatch.Below: The fully-assembled commander’s hatch complete with bird-cage armour.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 9. Next, attach the fully-assembled commander’s hatch to the top of the M551 Sheridan turret.Below: With the commander’s turret in place, the M551 Sheridan is ready for the painting table.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Adding A Vehicle Commander
Step 1. To add a vehicle commander, use the open commander’s hatch rather than the closed commander’s hatch.Step 2. Assemble the commander’s hatch as seen in the steps above.Step 3. Attach a vehicle commander figure to the inside of the open hatch.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 4. Next, attach the fully-assembled commander’s hatch complete with vehicle commander to the top of the M551 Sheridan turret.Below: With the commander’s turret in place complete with vehicle commander; the M551 Sheridan is ready for the painting table.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
US Vehicle Painting Guide
US Vehicle Painting Guide
Posted on

M551 Sheridan Spotlight (VUS002)

Includes one  M551 Sheridan

The M551 Sheridan was developed as an amphibious cavalry tank or air-landing tank capable of tackling Soviet tanks. As a result its main armament was an anti-tank missile launcher that could also fire conventional shells. Getting this complex weapon system to work delayed the introduction of the Sheridan, but it finally reached Vietnam in 1968. Once there, its crews liked its firepower, speed, and ability to cross flooded rice paddies, but missed the thick armour of the much heavier M48 and its ability to smash its way through thick jungle.Check out the M551 Sheridan in the online store here… 
The M551 Sheridan was made of light aluminium alloys, like the M113, giving it considerable mobility. It combined this with the punch of a 152mm gun capable of firing ‘beehive’ canister rounds.

Designed by Tim Adcock.
Painted by Mark Hazell.

The M551 Sheridan
The M551 Sheridan in Flames Of War
Contents of the M551 Sheridan Box Set
Contact the customer service team at [email protected] if you have any issues with any of the components.