Howitzer – Vietnam Miniatures Game

Posted on December 3, 2017April 16, 2018 by

M114 155mm Firebase Assembly Guide

The M114A1 155mm Howitzer Crew
Description of Components
a. 2x Standing figures bending over.
b. 2x Standing figures with hands on hips.
c. 2x Loader figures holding shell.
d. 2x Standing figures covering ears.
e. 2x Standing figures with arm raised.

Assembling The M114A1 155mm Howitzer Crew
Simply arrange one of each figure type around each of the M114A1 155mm howitzer to taste. The M114A1 155mm howitzer and crew a modelled on the large six-hole bases provided in the box set.

Description of Components

a. 4x Gun trail wheels.
b. 2x Gun shields / carriages.
c. 2x Gun carriage stabilisers.

d. 2x Gun barrels.
e. 2x Gun trail legs.
f. 2x Gun trail spades.

The Bases
Description of Components
3x Large six-hole bases.

Assembling The M114A1 155mm Howitzer

Step 1. Begin assembly of the M114A1 155mm howitzer by attaching the spades to the end of the gun trail legs.		Below: Both spades attached to the gun trail legs.	Step 2. Next, attach the gun carriage wheels to the sides of the gun shield / carriage.

Below: Both gun carriage wheels successfully attached to the gun shield / carriage.	Step 3. Next, its time to attach the gun trail legs. The back of the gun shield has been keyed to accept the gun trail legs.	Below: Attaching the gun trail leg to the back of the gun shield.

Below: Both gun trail legs successfully attached to the back of the gun shield.	Step 4. Next, attach the gun carriage stabiliser to the underside of the gun shield.

Below: The attached gun carriage stabiliser on the underside of the gun shield.		Step 5. Finally, attach the gun barrel to the gun carriage.

Below: The gun barrel attaches to the gun carriage just behind the recuperator cylinder.		Below: With the gun barrel in place the M114A1 155mm howitzer is ready to be painted.

Posted on December 3, 2017July 19, 2023 by christo

M114 155mm Firebase (VUSBX10) Spotlight

Includes one Gun section with three M114A1 155mm howitzers with crew & three Large six-hole bases.

Development of the 155mm howitzer M1 began during the late 1930s, when the United States Army determined it needed a new medium field artillery piece to replace the World War One vintage howitzer M1917.

Check out the 155mm Field Artillery Battery in the online store here…

The 155mm used separate loading ammunition comprised of four components: a projectile, a separate bagged propellant charge, a fuse and a primer. The propelling charge contained individual bags of powder, which could be reduced depending on the range of the target. The projectiles weighed 95lb each with the fuses placed in the base of the projectile after a ring used for shipping was removed. The primers were placed in the breech of the gun for firing. The 155mm howitzer typically fired 80% or more HE (high explosive) shells, however, it could also fire smoke or white phosphorus shells.

In 1962 the designation system for artillery changed and the 155mm howitzer became known as the M114A1 155mm howitzer. The change in designation didn’t detract from its performance in any way during the course of the conflict in Vietnam.

Gun designed by Evan Allen & Seth Nash
Crew designed by Evan Allen
Painted by Mark Hazell

The M114A1 155mm Howitzers

The M114A1 155mm Howitzer in Flames Of War Vietnam

Contact the customer service team at [email protected] if you have any issues with any of the components.

Posted on December 3, 2017April 16, 2018 by

105mm Field Artillery Battery Assemby

Description of Components

The M101A1 105mm Howitzer Crew
Description of Components
a. 2x Standing figures bending over.
b. 2x Loader figures holding shell.
c. 2x Loader figuers discarding spent shell case.
d. 2x Standing figures with arm raised.
e. 2x Standing figures with hands on hips.

Assembling The M101A1 105mm Howitzer Crew
Simply arrange one of each figure type around each of the M101A1 105mm howitzer to taste. The M101A1 105mm howitzer and crew a modelled on the large six-hole bases provided in the box set.

The M101A1 105mm Howitzer
Description of Components
a. 3x Gun trails.
b. 6x Gun trail wheels.
c. 3x Gun shields
d. 3x Gun barrels.

The Bases
Description of Components
2x Large six-hole bases.

Assembling The M101A1 105mm Howitzer

Step 1. Begin assembly by attaching the wheels to the gun trail.			Below: The back of the gun shield has a tab that is keyed to the front of the gun trail.

Below: The front of the gun trail has been keyed to accept the gun shield.	Step 2. Attach the gun shield to the front of the gun trail.	Below: The gun trail has been keyed on either to accept the gun barrel.

Below: The gun barrel has been keyed to match the gun trail.	Step 3. Finally, attach the gun barrel to the gun trail at the desired level of elevation.	Below: With the gun barrel in place, the M101A1 105mm howitzer is ready tohit the painting table.