Posted on

ASPB (Assault Support Patrol Boat) Assembly

ASPB (VUSBX15)Assembling the ASPB
Follow this guide to correctly assemble your ASPB. For metal and resin models like this one, we recommend you use cyanoacrylate ‘Super Glue’.GF9 Super Glue is available in the online store…
Contact the customer service team at [email protected] if you have any issues with any of the components.
The contents for the ASPB Box Set
Step 1. Begin assembly by glueing the guns to the turrets. Make sure they are facing the correct way.Step 2. Glue the gunner to the 81mm mortar.
ASPB (VUSBX15)ASPB (VUSBX15)ASPB (VUSBX15)
Below. Gunner glued correctly.Step 3. Glue the radar dome into the hole in front of the boat’s pilot house.
ASPB (VUSBX15)ASPB (VUSBX15)ASPB (VUSBX15)
Step 4. Add all the pieces you’ve just assembled into their respective places as seen below.
ASPB (VUSBX15)
And you’re done! Happy modelling.
Posted on

US Monitor Boat Assembly

 

Monitor (VUSBX13)Assembling the Monitor

Follow this guide to correctly assemble your Monitor. For metal and resin models like this one, we recommend you use cyanoacrylate ‘Super Glue’.GF9 Super Glue is available in the online store…
Contact the customer service team at [email protected] if you have any issues with any of the components.
The contents for the Monitor Box Set
Monitor (VUSBX13)
Step 1. Add the bow to the hull (you don’t have to use glue for this part).Step 2.Glue the pilot’s deck to the hull.Below. Hull assembled correctly.
Monitor (VUSBX13)Monitor (VUSBX13)Monitor (VUSBX13)
Step 3. Glue the guns into their turrets as shown below. (Make sure you don’t glue the 40mm gun into the 20mm gun turrets).Step 4. Glue the hatch cover to each of the the Zippo Flamethrowers.
Monitor (VUSBX13)Monitor (VUSBX13)Monitor (VUSBX13)
Step 5. Next place the Flamethrower onto the gun mount (Ensure you do not glue this part so you can rotate the guns in game.)Step 6. Glue the gunner to the 81mm mortar.
Monitor (VUSBX13)Monitor (VUSBX13)Monitor (VUSBX13)
For your 20mm turrets you have the option of choosing the M2 .50cal turret or the 40mm Grenade turret.The Monitor has three different variants. The CCB Monitor, Zippo Monitor and the Monitor with MK 2 81mm mortar. Look below to see the placement for each variant.
Monitor (VUSBX13)Monitor (VUSBX13)
Monitor (VUSBX13)Monitor (VUSBX13)
Happy Modelling!
Monitor (VUSBX13)
Posted on

PBR (Patrol Boat, River x2) Assembly

 

Step 1. Begin assembly of the Patrol Boat by gluing the radar dome into the hole in front of the boat’s pilot house.
PBR (Patrol Boat, Riverine x2) (VUSBX12)PBR (Patrol Boat, Riverine x2) (VUSBX12)
Tip: We recommend that you use good quality Super Glue to assemble resin and metal vehicles.
Step 2. Add the Twin M2 .50cal gun to the front deck turret.The front deck turret goes in the hole shown below. Do not glue it into place, so it can rotate to face toward its target.
PBR (Patrol Boat, Riverine x2) (VUSBX12)PBR (Patrol Boat, Riverine x2) (VUSBX12)PBR (Patrol Boat, Riverine x2) (VUSBX12)
Step 3. Next, add the upright armored shields in the slots located in the back of the boat. Make sure the rounded corners face upwards.
PBR (Patrol Boat, Riverine x2) (VUSBX12)PBR (Patrol Boat, Riverine x2) (VUSBX12)
Step 4. Begin assembly of the rear deck turret by adding the M2 .50cal to the gunner. Make sure the pin that holds the gun into place on the boat faces downwards.
PBR (Patrol Boat, Riverine x2) (VUSBX12)PBR (Patrol Boat, Riverine x2) (VUSBX12)
Step 5. Once the bond has cured, place the gunner into the notch that holds the gun as shown below.
PBR (Patrol Boat, Riverine x2) (VUSBX12)PBR (Patrol Boat, Riverine x2) (VUSBX12)

The fully assembled PBR

PBR (Patrol Boat, Riverine x2) (VUSBX12)
I hope you found this article helpful while assembling your PBR. Happy modelling!

~ George.

Posted on

M114 155mm Firebase Assembly Guide

 

155mm Field Artillery Battery (VUSBX10)The M114A1 155mm Howitzer Crew
Description of Components

a. 2x Standing figures bending over.
b. 2x Standing figures with hands on hips.
c. 2x Loader figures holding shell.
d. 2x Standing figures covering ears.
e. 2x Standing figures with arm raised.
Assembling The M114A1 155mm Howitzer Crew
Simply arrange one of each figure type around each of the M114A1 155mm howitzer to taste. The M114A1 155mm howitzer and crew a modelled on the large six-hole bases provided in the box set.
155mm Field Artillery Battery (VUSBX10)
Description of Components
a. 4x Gun trail wheels.
b. 2x Gun shields / carriages.
c.
 2x Gun carriage stabilisers.
d. 2x Gun barrels.
e. 2x Gun trail legs.
f. 2x Gun trail spades.
155mm Field Artillery Battery (VUSBX10)The Bases
Description of Components
3x Large six-hole bases.
Assembling The M114A1 155mm Howitzer
Step 1. Begin assembly of the M114A1 155mm howitzer by attaching the spades to the end of the gun trail legs.Below: Both spades attached to the gun trail legs.Step 2. Next, attach the gun carriage wheels to the sides of the gun shield / carriage.
155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)
Below: Both gun carriage wheels successfully attached to the gun shield / carriage.Step 3. Next, its time to attach the gun trail legs. The back of the gun shield has been keyed to accept the gun trail legs.Below: Attaching the gun trail leg to the back of the gun shield.
155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)
Below: Both gun trail legs successfully attached to the back of the gun shield.Step 4. Next, attach the gun carriage stabiliser to the underside of the gun shield.
155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)
Below: The attached gun carriage stabiliser on the underside of the gun shield.Step 5. Finally, attach the gun barrel to the gun carriage.
155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)
Below: The gun barrel attaches to the gun carriage just behind the recuperator cylinder. Below: With the gun barrel in place the M114A1 155mm howitzer is ready to be painted.
155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)155mm Field Artillery Battery (VUSBX10)
Posted on

105mm Field Artillery Battery Assemby

 

Description of Components
105mm Field Artillery Battery (VUSBX09)The M101A1 105mm Howitzer Crew
Description of Components

a. 2x Standing figures bending over.
b. 2x Loader figures holding shell.
c. 2x Loader figuers discarding spent shell case.
d. 2x Standing figures with arm raised.
e. 2x Standing figures with hands on hips.
Assembling The M101A1 105mm Howitzer Crew
Simply arrange one of each figure type around each of the M101A1 105mm howitzer to taste. The M101A1 105mm howitzer and crew a modelled on the large six-hole bases provided in the box set.
The M101A1 105mm Howitzer
Description of Components

a. 3x Gun trails.
b. 6x Gun trail wheels.
c. 3x Gun shields
d. 3x Gun barrels.
105mm Field Artillery Battery (VUSBX09)
105mm Field Artillery Battery (VUSBX09)The Bases
Description of Components
2x Large six-hole bases.
Assembling The M101A1 105mm Howitzer
Step 1. Begin assembly by attaching the wheels to the gun trail.Below: The back of the gun shield has a tab that is keyed to the front of the gun trail.
105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)
Below: The front of the gun trail has been keyed to accept the gun shield.Step 2. Attach the gun shield to the front of the gun trail.Below: The gun trail has been keyed on either to accept the gun barrel.
105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)
Below: The gun barrel has been keyed to match the gun trail. Step 3. Finally, attach the gun barrel to the gun trail at the desired level of elevation.Below: With the gun barrel in place, the M101A1 105mm howitzer is ready tohit the painting table.
105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)105mm Field Artillery Battery (VUSBX09)
Posted on

M109 (155mm) and M108 (105mm) Assembly

 

Step 1. Begin assembly of the M109 (155mm) by attaching the tracks.
Tip: Ensure that the drive sprocket is towards the rear of the vehicle.Below: The left-hand side track attached to the hull.Below: The right-hand side track attached to the hull.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Tip: When referring to left or right-hand side in regards to a Flames Of War miniature, the orientation is determined as if looking at the vehicle from the rear.
Step 2. Next, attach the recoil spades to the back of the resin hull of the M109 (155mm).Below: The left-hand side recoil spade in place.Below: Both recoil spades correctly attached to the rear of the M109.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Below: Tim has created a magnet well in the turret and the guns to make for an easy barrel swap. Below: The magnet wells in the back of the gun barrels.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Below: The magnets attached to the gun barrels.Below: The 155mm gun barrel attached to the turret.Below: The 105mm gun barrel attached to the turret.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Below: An optional step is to drill out the muzzle brake of the 155mm gun.Tip: A 2mm drill bit is perfect for drilling out the muzzle brake of the 155mm gun barrel.Below: Carefully drill through the first baffle of the muzzle brake.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Below: Drill through the second baffle of the muzzle brake.Below: The completed drilled out muzzle brake of the 155mm. Step 3. Next, attach the commander’s hatch to the top of the turret.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Step 4. Attach the .50 cal AA MG to the mounting arm on the commander’s hatch.Below: With the .50 cal AA MG in place, the M109 (155mm) is ready for painting.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Adding A Tank Commander
Step 1. Replace the close hatch with the open commander’s hatch.Step 2. Attach a tank commander figure.Step 3. Attach the .50 cal AA MG.Below: The fully-assembled M109 (155mm) complete with tank commander.
M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)M109 (155mm) (VUSBX08)
Posted on

M113 Platoon (VUSBX07) Assembly Guide

Assembling The Basic M113 Hull
To assemble the M113, there are a number of components that are common to all of the variants of the M113 that can be constructed using the box set; the hull being case in point.The components seen on the plastic spures below highlighted in green are used to construct all of the M113 variants. The components highlighted in red are optional and can be included if you so choose.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembly of the Basic M113 Hull

Step 1. Each track for the M113 has a small tab on the front end. This tab sits up against with the lower half of the hull front as seen in the examples below.

Below: The right-hand and left-hand side tracks attached successfully to the hull.

Tip: When referring to left or right-hand side in regards to a Flames Of War miniature, the orientation is determined as if looking at the vehicle from the rear.

M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 2. Next, attach the front glacis plate to the front of the hull.Below: The glacis plate attached to the front of the hull.Step 3. Next, time to assemble the rear section; this is made up of the ramp and the rear door.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Below: The assembled ramp section.Step 4. Next,attach the rampsection to the back of the hull.Below: With the ramp section attached, the basic hull is now fully assembled.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembling The Optional Components
The Trim Vane
Before crossing rivers, the trim vane on the M113 was lowered to prevent water from entering the vehicle via any open hatches.Below: The trim vane attached to the front of the hull.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
The Side Fenders
The side fenders attach to the hull just above the tracks as shown in the example below.
Below: The side fender attached to the sides of the M113.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembling The M113
Along with the basic hull components; the components seen on the plastic spures below highlighted in green are used to construct the M113 complete with different weapons options.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 1. Begin by attaching the top deck to the top of the hull.Step 2. Next, attach the passenger compartment hatch.Step 3. Followed by the vehicle driver’s hatch.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 4. Next, assemble the .50 cal MG turret.Below: The .50 cal MG turret attached to the M113.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 5. Next, assemble the M60 passenger fired MGs and attach them to the vehicle.Below: The M113 complete with .50 cal MG and passenger fired M60 MG. Below: The Okinawa turret was also commonly seen on the M113 in Vietnam.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 6. Attach the hatch and the .50cal MG to the Okinawa turret.Below: The M113 complete with Okinawa turret.Below: A second passenger fired M60 MG can also be added the M113 at an additional points cost.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Below: A M40 106mm recoilless gun can also be added the M113 at an additional points cost.Step 7. A M134 minigun can also be added at an additional points cost. To do so, attach the gun shield to the front of the turret.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 8. Next, attach the hatch and the minigun to the turret.Below: The M113 complete with M134 minigun.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembling The M113 ACAV
Along with the basic hull components; the components seen on the plastic spures below highlighted in green are used to construct the M113 ACAV complete with different weapons options.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Note: The M113 ACAV can be armed with a .50 cal MG and two side mounted M60 passenger fired MGs or with a Mk 19 40mm MG which replaces the .50 cal MG and the two M60 passenger fired MGs. The turret is the same as the M134 minigun turret (see the instructions above) but the gun is simply replaced.
Below: The M113 ACAV armed with the .50 cal MG and two M60 passenger fired MGs.Below: The M113 ACAV armed with the Mk 19 40mm MG and two M60 passenger fired MGs.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembling The M132 Zippo
Along with the basic hull components; the components seen on the plastic spures below highlighted in green are used to construct the M132 Zippo.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Note: The M132 Zippo is armed with a M10-8 flame-thrower and a M73 MG. However, the M73 MG can be replaced with a .50 cal AA MG for +5 points per track.
Step 1. Attach the hatch to the rear of the flame-thrower turret.Step 2. Next, attach the flame-thrower to the front of the turret.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Below: The turret complete with flame-thrower.Below: The M132 Zippo fully assembled.Below: The MG in the turret can be replaced for a .50 cal AA MG for an additional points cost.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembling The M125 (81mm)
Along with the basic hull components; the components seen on the plastic spures below highlighted in green are used to construct the M125 (81mm).
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 1. Begin by attaching the top deck to the the top of the hull.Step 2. Attach the hinged section to the top open fighting compartment hatch.Step 3. Add the .50 cal MG turret and the driver’s hatch.Step 4. Attach the M29 81mm mortar to the base plate.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Below: The M29 81mm mortar attached to the base plate.Step 5. Next, add the M29 81mm mortar to the fighting compartment.Step 6. Finally, add any mortar crew figures to the fighting compartment.

Note: The box set includes enough mortar crew figures for one figure per vehicle.

Below: The M125 (81mm) fully assembled and ready for painting.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Assembling The M106 (4.2in)
Along with the basic hull components; the components seen on the plastic spures below highlighted in green are used to construct the M106 (4.2in).
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Step 1. Assembly the top deck as seen above with the M125 (81mm). However, unlike the M125 (81mm) the M106 (4.2in) has the mortar base plate attached to the left-hand side of the vehicle. See the examples below.Step 2. Next, attach the 4.2in mortar to the base plate.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Below: The 4.2in mortar attached to the base plate.Step 3. Next, add the 4.2in mortar to the fighting compartment.Step 4. Finally, add any mortar crew figures to the fighting compartment.

Note: The box set includes enough mortar crew figures for one figure per vehicle

Below: The M106 (4.2in) fully assembled and ready for painting.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Adding Crew Figures
Adding The Driver

To add a driver, simply attach the driver’s hatch to the vehicle in an open position and add a driver head to the now open hatch.
Right: Adding a driver.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
Tip: Adding a vehicle commander is ideal for representing your platoon command vehicle.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)Adding Turret Crew Figures
To add a turret crew figure, simply attach the turret hatch in an open position and add a turret crew figure inside the open turret.Left: Adding a turret figure.
More Examples of Turret Crew Figures
Here are some more examples of the turret crew inside the other turret options for the M113.
Right: Inside a Okinawa turret.
Far right: Inside a ACAV turret.
M113 Platoon (VUSBX07)M113 Platoon (VUSBX07)
US Vehicle Painting Guide
ANZAC Vehicle Painting Guide
Posted on

M551 Sheridan (VUS002) Assembly Guide

Step 1. Begin assembly by attaching the tracks to the hull of the M551 Sheridan.

Note: Each track has been keyed to correspond with a particular side of the hull; this aids in ensuring the correct orientation of the tracks when assembling the miniature.

Below: The correct alignment for the left-hand side track.Below: The correct alignment for the right-hand side track.Below: The left-hand side track attached to the hull.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Tip: When referring to left or right-hand side in regards to a Flames Of War miniature, the orientation is determined as if looking at the vehicle from the rear.
Below: The right-hand side track attached to the hull.Step 2. Attach the driver’s vision hatch to the front of the M551 Sheridan.Below: The driver’s hatch vision correctly attached to the front of the M551 Sheridan.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 3. Next, attach the M81 152mm gun to the front of the turret.Below: The M81 152mm gun correctly attached to the front of the M551 Sheridan turret.Step 4. The smoke dischargers attached to the underside of the M551 Sheridan turret. Each side has been keyed to corresponding part. The right-hand side can be seen below.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Below: The left-hand side smoke discharger recess.Below: The corresponding left and right-hand side smoke dischargers keyed to match the turret.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Below: The smoke dischargers correctly attached to the M551 Sheridan turret.Step 5. Next, attach the loader’s hatch to the top of the turret.Below: The loader’s hatch attached to the top of the turret.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 6. Time to begin assemble of the commander’s hatch. Begin by attaching the .50 cal MG to the mount located at the front of the hatch. See the examples below.Step 7. Next, attach the gun shield to the front of the .50 cal MG.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Below: The gun shield attached to the .50 cal MG.Step 8. Finally, attach the bird-cage armour to the rear of the commander’s hatch.Below: The fully-assembled commander’s hatch complete with bird-cage armour.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 9. Next, attach the fully-assembled commander’s hatch to the top of the M551 Sheridan turret.Below: With the commander’s turret in place, the M551 Sheridan is ready for the painting table.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Adding A Vehicle Commander
Step 1. To add a vehicle commander, use the open commander’s hatch rather than the closed commander’s hatch.Step 2. Assemble the commander’s hatch as seen in the steps above.Step 3. Attach a vehicle commander figure to the inside of the open hatch.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
Step 4. Next, attach the fully-assembled commander’s hatch complete with vehicle commander to the top of the M551 Sheridan turret.Below: With the commander’s turret in place complete with vehicle commander; the M551 Sheridan is ready for the painting table.
M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)M551 Sheridan (VUSBX06)
US Vehicle Painting Guide
US Vehicle Painting Guide
Posted on

M48 Patton (VUS041) Assembly Guide

Step 1. Begin assembly with the tracks.

Tip: Each track is stamped with the letter ‘R’ or ‘L’  and an arrow to indicate correct orientation.

Below: The correct alignment for the left-hand and right-hand side tracks.

Tip: When referring to left or right-hand side in regards to a Flames Of War miniature, the orientation is determined as if looking at the vehicle from the rear.
M48A3 Patton M48A3 Patton M48A3 Patton (VUSBX05)
Below: The left-hand side track attached to the hull.Below: The right-hand side track attached to the hull.Step 2. Attach the main gun to the front of the turret.
M48A3 Patton M48A3 Patton M48A3 Patton
Below: The main gun attached to the turret.Step 3. Next, attach the infrared searchlight to the top of the main gun.

Tip: There is a contoured section on the base of the searchlight that attached to the top of the gun.

M48A3 Patton M48A3 Patton M48A3 Patton M48A3 Patton
Step 4. Attach the loader’s hatch to the top of the turret.Step 5. Next, add the cupola MG to the top of the turret.
M48A3 Patton M48A3 Patton M48A3 Patton
Below: The cupola MG in place.Step 6. Attach the hatch to the rear of the cupola MG.Note: Later versions of the M48A3 added a ring of version blocks below the cupola MG.
M48A3 Patton M48A3 Patton M48A3 Patton M48A3 Patton
Below: The ring of vision blocks attached below the cupola MG. Tip: A loader’s hatch MG can be added to the M48A3 at a small points cost.
M48A3 Patton M48A3 Patton M48A3 Patton
Below: The .30 cal MG attached to the top of the turret for +5 per tank.Below: The .50 cal AA MG attached to the top turret for +10 points per tank.Below: With the .50 cal AA MG in place, the M48A3 is ready for painting.
M48A3 Patton M48A3 Patton M48A3 Patton
Adding Tank Commanders
Step 1. Attach the hatch at the rear of the cupola MG in an open position.Step 2. Add the tank commander figure of choice inside the open hatch.Step 3. Repeat the process if you wish to add a commander figure in the loader’s hatch.
M48A3 Patton M48A3 Patton M48A3 Patton
Below: The commander figure attached to the inside of the open hatch.Below: With the tank commander’s in place, the M48A3 is ready to hit the painting table.
M48A3 Patton M48A3 Patton

 

Posted on

US 4.2″ Mortar Platoon Assembly

 

4.2" Mortar Platoon (VUS717)The 4.2in Mortars & Crew
Description of Components
a. 3x Gunner figures loading projectile.
b. 4x Gunner figures holding projectile.
c. 3x Standing figures covering ears.
d. 3x Standing figures with hands on hips.
e. 3x Standing figures with hand in air.
f. 4x M30 4.2in mortar tubes with base plate.
Assembling The 4.2in Mortar Teams
Each 4.2in mortar team consists of one M30 4.2in mortar manned by a four-man crew. The crew consists of one of figure type B with the remaining three crew members made up from a mixture of figure types A, C, D and E. Feel free to use which ever poses you think work best in your mortar teams. The 4.2in mortar teams are based using the large six-hole bases included in the blister pack.
The Bases
Description of Components
a. 1x Small three-hole base.
b. 4x Large six-hole bases.
4.2" Mortar Platoon (VUS717)
US Infantry Painting Guide
4.2" Mortar Platoon (VUS717)